Login |

2SAN logo

Search
Hot Product Promotion
Security Surveillance
ACARD
Portable Storage
Solid State Drive
Duplicator
Bridge
Adapter
RAID System
Software
SCSI Hard Drive
Home > Products > by Category
      
 
 
ACARD 
ANS-9012 plus ACP-2200
2.5 inch SATA-to-SDHC Flash Disk plus USB/eSATA to SATA & IDE Interface Bridge

ANS-9012
Attention：SD Card not including
The ANS-9012 Flash Disk uses SDHC (Secure Digital High Capacity) memory cards in a 2.5" SATA HDD form-factor to act as a solid state 2.5" SATA HDD. Its advantages include lightness, compactness, better transfer rates and shock resistance compared to conventional hard disks, lower power consumption, less noise during operation and better tolerance for temperature changes.

The ANS-9012 offers practically unlimited scalability depending on the SDHC capacity. As SDHC is relatively inexpensive compared to the solid state drives now on the market, it offers a very competitive solution in terms of price, speed and capacity. For industrial computers and military computers that must operate for long periods of time in special working environments, the ANS-9012 can replace conventional HDDs for better reliability and meet more types of usage requirements.


ACP-2200

ACP-2200 Interface Bridge is the first dual-interface product on the market to support USB and eSATA, easily bridging devices such as hard disks or optical drives for users. It allows users to easily connect devices (such as hard disks or optical drives) with different interfaces. It is particularly handy for engineers that often have to simultaneously use 2.5”/3.5" hard disks or 5.25” devices for testing hard disks and computer systems as devices can be quickly installed or replaced. Devices can be connected using the appropriate IDE or SATA interface without having to open up the external disk enclosure. The USB and eSATA interfaces are also easy to use, allowing the devices connected to the ACP-2200 to quickly set up in the computer without having to reboot.
 
Enlarg
 

ANS-9012
Features

  • Standard 2.5" SATA HDD interface
  • Offers a fast and low-cost replacement to expensive solid state drives.
  • Offers solid state drives' advantages such as zero noise and low power consumption.
  • Offers stable and reliable performance.
  • Offers better read/write access performance, shock resistance and operating temperature range than conventional HDD.
  • No drivers or software required.

    • Specificaitons
  • Supports SATA 1.5/3Gbps interface in host
  • Provides 6 expansion and each slot can support up to 4G, making it the largest available 32GB SDHC *1/2/3/4/5/6.
  • Maximum capacity: Depends on SDHC capacity
  • Supports all operating systems

    • Note：
    (1)Compatible only with SLC SDHC for OS booting
    (2)Must install the same model and capacity of SDHC card


    ACP-2200

    Features

  • Supports USB2.0 and eSATA connections to the PC
  • Can be connected to SATA and IDE hard disks or optical drives
  • LED indicators to show the IDE/SATA device access status
  • Thoughtful OTB (one Touch Backup) button designed to support USB backup at the press of a button
  • Can be used with eSBR (Easy Storage, Easy Backup, Easy Recovery) application
  • Offers connectors for 2.5", 3.5"and 5.25"drives with fool-proof installation
  • Streamline design, goes well with Notebook

    • Specifications
  • Built-in ACARD USB/eSATA to SATA & IDE single control chip
  • Portable USB interface to support 2 device
  • Supports 3.5" HDD of 750GB and above
  • Power adapter for 100~240V
  • Supports overvoltage and instantaneous current protection
    		•
    © 2004 - 2010 2SAN Inc. All rights reserved.